FOLLOW US ON TWITTER
SHARE THIS PAGE ON FACEBOOK, TWITTER, WHATSAPP ... USING THE BUTTONS ON THE LEFT


YOUR PARTICIPATION FOR THE GROWTH OF PHYSICS REFERENCE BLOG

Saturday, February 4, 2017

A straight conductor carrying a current I is at an angle θ to a uniform magnetic field of flux density B, as shown in Fig. 6.1.







Question 1
(a) A straight conductor carrying a current I is at an angle θ to a uniform magnetic field of flux density B, as shown in Fig. 6.1.


Fig. 6.1
The conductor and the magnetic field are both in the plane of the paper. State
(i) an expression for the force per unit length acting on the conductor due to the magnetic field, [1]

(ii) the direction of the force on the conductor. [1]

(b) A coil of wire consisting of two loops is suspended from a fixed point as shown in Fig. 6.2.


Fig. 6.2
Each loop of wire has diameter 9.4 cm and the separation of the loops is 0.75 cm.
The coil is connected into a circuit such that the lower end of the coil is free to move.
(i) Explain why, when a current is switched on in the coil, the separation of the loops of the coil decreases. [4]

(ii) Each loop of the coil may be considered as being a long straight wire.
In SI units, the magnetic flux density B at a distance x from a long straight wire carrying a current I is given by the expression
B = (2.0 × 10–7) I / x

When the current in the coil is switched on, a mass of 0.26 g is hung from the free end of the coil in order to return the loops of the coil to their original separation. Calculate the current in the coil. [4]





Reference: Past Exam Paper – November 2007 Paper 4 Q6





Solution 1:
(a)
(i) Force per unit length = BI sinθ

(ii) Direction: (downwards) into (the plane of) the paper
{Fleming’s left hand rule: Thumb = Force = ???, Forefinger = Field and Middle finger = Current = to right here.
Note that in this case, B and I are in same plane and the angle between them is NOT 90o. The force SHOULD be perpendicular to both B and I.}

(b)
(i)
{Direction of the magnetic field is obtained from the right hand grip rule}
EITHER
The magnetic field (due to the current) in one loop cuts / is normal to the current in the second, causing a force on the second loop.     EITHER Newton’s 3rd law discussed {From Newton’s 3rd law, a force will also act on the first loop and gives rise to an attraction between the 2 loops}                 OR vice versa clear gives rise to attraction

OR
Each loop acts as a coil which produces magnetic field. The fields are in the same direction {as the current in the 2 loops is in the same direction}, so the loops attract {causing the separation between them to decrease}.           

(ii)
F = BIL
Magnetic flux density, B = (2.0×10-7) I / (0.75×10-2) {= 2.67×10-5 I}
Force F = (Weight = mg =) (0.26×10-3) × 9.81 (= 2.55×10-3 N)        
{length of one loop, L = circumference = 2π r = 2π (d/2) = 2π (9.4×10-2) / 2 = 2π (4.7×10-2)}
2.55×10-3 = [(2.67×10-5) × I] × I × [2π (4.7×10-2)]    
Current I = 18 A

4 comments:

  1. Pls how are you able to type equations on your blog?

    ReplyDelete
  2. i don't get part b)ii). Why did you equate the weight of the mass to F acting on the loop?

    ReplyDelete
    Replies
    1. the loops return to their original separation where the mass is placed.

      so, magnetic force is equal is equal to the weight as the forces cancel out.

      Delete

If it's a past exam question, do not include links to the paper. Only the reference.
Comments will only be published after moderation

Currently Viewing: Physics Reference | A straight conductor carrying a current I is at an angle θ to a uniform magnetic field of flux density B, as shown in Fig. 6.1.